As an Amazon Associate I earn from qualifying purchases.
Microdermabrasion – it is a very long word. However, its meaning is not as complicated as one might think at first. It consists of three words: micro – very small, tiny; derma (dermis) – skin, and abrasion – scraping. In conclusion, we understand that the meaning of the word microdermabrasion implies cleaning of the skin in its smallest parts – pores, and layers.
In other words, microdermabrasion is the mechanical exfoliation of the dead cells of the epidermis by a diamond probe. Exfoliation sends signals to the deeper layers of the skin, thereby promoting the formation of collagen and elastin. As a result, the skin becomes radiant, youthful, healthier, cleaner, and looks much better than before the treatment.
Also, we must point out that it is a very gentle and non-aggressive method of removing the upper layer of skin, that is, the dead cells of the stratum cornea. It is one of the basic and most effective skin texture improvement procedures.
- 1 What is Acne?
- 2 What causes acne?
- 3 How Does Acne Develop?
- 4 Microdermabrasion and Acne Treatment
- 5 Most Selling Crystal Microdermabrasion Kit
- 6 Most Selling Diamond Tip Microdermabrasion Machines
- 7 Microdermabrasion for Blackheads
- 8 How Does the Microdermabrasion Procedure Work?
- 9 Does Microdermabrasion hurt?
- 10 Microdermabrasion Aftercare
- 11 Microdermabrasion side effects
What is Acne?
Acne is one of the most common skin diseases. The term “acne” is derived from the Greek language, meaning skin rash. About 80% of teenagers have acne, which is a problem more or less pronounced depending on other factors and it usually subsides by the age of 25. A large number of people think that acne will go away on their own over time and does not seek the help of a dermatologist.
However, people with more severe cases thus increase the possibility of late effects in terms of the appearance of permanent acne scars. This is why microdermabrasion can be helpful in preventing the formation of the scars, as well as treating the already existing damage.
What causes acne?
First, we should know what causes acne. Acne is not caused by poor hygiene, and excessive cleaning and scrubbing of the skin with various products (foams, soaps, gels, lotions) can aggravate the skin condition and result in redness and flaking.
If you physically try to squeeze acne, you can also aggravate the condition, that is, you can cause an inflammatory reaction that can result in hyperpigmentation and create a new scar.
The fact is that there are many effective treatments available today that will significantly reduce the onset of new lesions, and therefore the onset of the consequences, such as hyperpigmentation that can last for a long time, and scarring as a lasting consequence.
Successful treatment contributes to the confidence of every person with acne. As already said, one of those treatments is microdermabrasion.
How Does Acne Develop?
Let’s first learn how acne develops. People with acne often share the same problem with someone in the immediate family (father, mother, brother or sister). It is thought that we inherit the size of the sebaceous glands and their functional sensitivity to the hormonal influence as well as the propensity for follicular keratosis.
This means that the hormones with androgenic effects do not necessarily need to be elevated, but it is rather the sensitivity of the sebaceous glands to those hormones that are increased.
Under the hormonal influence, there is an increased secretion of sebum, impaired keratinization in the follicle, multiplication of bacteria that are normally normal inhabitants of our skin and consequently cause the appearance of acne and the inflammatory lesions.
Increased sebum secretion is one of the main prerequisites for the development of acne, because of the impaired keratinization of dead epithelial cells and sebum accumulation in the follicle, providing favorable conditions for bacterial development.
Microdermabrasion and Acne Treatment
Most Selling Crystal Microdermabrasion Kit
Acne treatment is a long-lasting process that requires good cooperation between the dermatologist and the patient, ensuring effective control of the new lesions.
Today, one of the treatments often recommended by the dermatologists is the microdermabrasion. Before microdermabrasion, you should ensure proper cleansing with a smart device like Foreo luna mini or Clarisonic Mia or anything you like. After that, if you use a professional facial steamer for steaming your face, it will be most effective. It is not the treatment that will solve the acne problem, but rather a preparatory step for other treatments.
Those can include antibiotic therapy, which in addition to antibacterial provides us with anti-inflammatory action. Furthermore, chemical peelings, cremes, and lotions are more effective when applied after the microdermabrasion treatment. You can also try microdermabrasion facial among all types of facial treatments. You should use a good diamond microdermabrasion kit for this.
See this video and follow the steps:
Most Selling Diamond Tip Microdermabrasion Machines
Microdermabrasion for Blackheads
Blackheads are acne-based changes on the skin that actually result from clogged pores. In the case of blackheads, pore-clogging occurs in a slightly different way than usual. Namely, the pores, although clogged, remain open at the top. When the excess sebum that clogs the pore comes in contact with air, oxidation occurs. This is the reason why blackheads have a blacktop.
Blackheads can develop into a pimple or remain in a plug form. They also widen the pores, even when they disappear, leaving behind pores that are visible holes and sometimes even leave scars.
In addition to sebum, pores can also become clogged with natural oils produced by the skin, as well as dead cells that form the upper layer of the skin. As this happens often, the blackheads are a common occurrence in humans. However, they are equally easy to remove if you choose the right procedure!
One of the best treatments you can use to remove these boring and stubborn pore clogs is microdermabrasion. Why is this treatment the most effective one when it comes to blackheads? It removes the surface layer of the skin, so it cleans the pores and therefore successfully removes the blackhead problem. Therefore, a regular microdermabrasion treatment guarantees that the blackhead problem, which almost always shows recidivism, will be kept under control. Use the best kit for blackhead.
How Does the Microdermabrasion Procedure Work?
Here we will look at how the process works and how the machine works.
Microdermabrasion works based on two methods:
Swiping a diamond/crystal-tipped wand over your skin. You can use the first procedure when using microdermabrasion at home while the second is mostly used in salons.
Firing intensely pressurized crystals against the surface of the skin to brighten and rejuvenate the skin. This process exfoliates the top layer of your skin vigorously but gently. This process removes impurities and dead skin layers. A built-in vacuum will at the same time suck out all dead skin cells and debris. This leaves your skin clearer and brighter.
None of the two processes require any medications or numbing agents. It naturally does not hurt. It has a feeling like a cat licking all over your skin with its tongue. No chemicals are involved in microdermabrasion except when there are skincare products involved.
Does Microdermabrasion hurt?
First of all, we must say that microdermabrasion does not hurt at all. Moreover, it must not hurt. If it does hurt, you must stop the procedure immediately and this is a sign that there is another type of problem with your skin that you must address to your dermatologist.
Secondly, as a method, microdermabrasion is very appreciative as it can be combined with other procedures used for the purpose of rejuvenating and beautifying the face and it does not cause discomfort for the patient. Why is that so?
Simply put, microdermabrasion is a mechanical procedure that removes the upper layer of the epidermis with a vacuum diamond head. It does not use needles or any other pieces of equipment that can hurt your skin. Thus, microdermabrasion deals with defects at the surface level, treating only the outer layer of skin.
Even though there is a diamond abrasive tip on the device, it is based on gentle micro-abrasion as is, therefore, a pleasant and completely painless procedure, without irritation or any discomfort. It can be used throughout the year as a separate treatment or supplement/preparation for another skin treatment.
It is definitely recommended during the winter and spring to clean the skin, and certainly after the summer or winter to refresh the skin and remove the surface layer.
Most people do not need time to recover after microdermabrasion. If a person experiences side effects, they disappear after a day or two. The side effects are very mild. Namely, your skin may be pink and slightly swollen immediately after the microdermabrasion treatment, but these side effects usually last only one day. In the hands of an experienced dermatologist or cosmetic surgeon, face microdermabrasion is a completely safe, painless procedure that does not require special aftercare. In most cases, you should be able to resume your daily activities immediately.
The microdermabrasion aftercare is very simple. At the end of the treatment, a moisturizer and sunscreen will be applied to the skin. This is the regular step of the procedure and your dermatologist or the person qualified to perform the treatment will apply the protective cream. It keeps the skin hydrated and protected.
Remember that you should avoid using topical acne medications for at least one day after the treatment. At the same time, it is extremely important to protect your skin by using sunscreen. Your skin may be more sensitive to the sun for a few weeks after treatment. Therefore, use sun protection for one month after the procedure.
Microdermabrasion side effects
As microdermabrasion is a non-invasive or minimally invasive skin treatment, the side effects occur rarely and are very mild. Moreover, the side effects usually last only from a few hours to one or two days.
They include milk redness. Most patients notice pinkish skin. Also, some patients report slightly swollen skin. This lasts for a few hours to one day. Most noteworthy, all patients are able to continue their usual daily activities, except exposure to the sun, immediately after the treatment.
Last update on 2021-08-01 / Affiliate links / Images from Amazon Product Advertising API